Jump to content

tomsteve

Member
 View Profile  See their activity

  • Posts

    816

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by tomsteve

  1. tomsteve
    scrappile, i wonder if increasing the hose diameter would make a difference.
  2. tomsteve
    i think the cause is the way the air moves through the 2 different seperators. the duststopper is designed for the air to move quicker through it-like a thein baffle/seperator, and the DD creates a tornadic action with the air bunchin up at the bottom causing more vacuuum in the bucket
  3. tomsteve
    to determine how big the spacers will need to be, after all is cut and before painting, lay it out and see what space works for ya.
  4. tomsteve
    to me, its not worth trying to remove .087" especially with plywood of any quality.
  5. tomsteve
    a carbon monoxide detector will not detect CO2 A carbon monoxide detector cannot detect carbon dioxide. In general, a carbon monoxide detector uses an electrochemical sensor that outputs electric current proportional to the amount of carbon monoxide the chemicals are exposed to. A carbon dioxide detector uses a non-dispersive infrared (NDIR) sensor that measures light in a sample of air.
  6. tomsteve
    unless you make enough dust to saturate the air so much you cant see the other end in a 12' shop, dust isnt a problem with a propane heater. the problem is the CO2 burning propane makes.
  7. tomsteve
    try it on some scrap.
  8. tomsteve
    heres how you can find out for yourself: cut a portrait doing it like the fellow scroller. frame it or whatever and put it away for a month. then pull it out at look at it. see if you can find what ya didnt cut and where ya went off course on the pattern. i modified this one. a couple of the cuts i joined to make one cut and left out others. i dont know where and i doubt too many other people could tell either. theres no right or wrong way to cut a pattern. patterns are only suggestions.
  9. tomsteve
    hot glue stick and a propane torch! get r done real quick!
  10. tomsteve
    here,too. i can enlarge on their regular printers that print on up to 11 by 17 paper, then theres the banner printers for larger stuff.
  11. tomsteve
    thats how i do it. one thing to note: i have an ex 16 and thought i could do a 32" sign. i didnt have the room to swing the workpiece when i got to the center so i redid the sign down to 28" to have that room.
  12. tomsteve
    im thinkin rey probably has a saw set up for a test drive.
  13. tomsteve
    the seyco is a great saw,too. its pretty much the old excalibur i think with a a couple upgrades. great customer support,too. https://www.seyco.com/seyco-st-21-swing-tilt-scroll-saw/
  14. tomsteve
    thanks all for the compliments! now on to hard part- making the frame. not too many ways to make the pattern but a frame??? a JILLION styles and ways!
  15. tomsteve
    iggy, would there be a way to make the font for the dog names the same used in the puzzles? i personally think that would look better than block type font.
  16. tomsteve
    in 14 years ive never made a pattern. about a month ago some friends of mine had to put one of their dogs down. della had cancer. im so glad della had the humans she had. they took great care of her.
  17. tomsteve
    one thing ive done when cutting thin stock is dull the blade out a bit. do some cutting in thicker wood for a bit then go at the thinner piece. but stack cutting is the best way to go. a #5 blade is quite aggressive for thin stock.
  18. tomsteve
    im thinkin theres more to that story
  19. tomsteve
    https://woodenvisions.com/shop/ https://www.scrollsawartist.com/scroll-saw-patterns/
  20. tomsteve
    if i could build what i have in my mind, id have this! ive drooled over this for years https://www.woodmagazine.com/ideas/wood-shop-showcase/ultimate-wood-shop-design
  21. tomsteve
    reads like yer wife needs to plan a garage addition for her car. i have an older delta benchtop and no benchspace for it either so its parked under one of my benches. although i dont use it as much as i used to i still dont like having to lug that thing out. im good once its out- i love turning roughsawn lumber into projects. then after, it typically sits on my table saw until i have to use the tablesaw again.
  22. tomsteve
    last of '19: USMC puzzle 1st of '20: my finger.
  23. tomsteve
    that motor would make the torqueist scrollsaw ever!
  24. tomsteve
    the clean part is important. mineral spirits,lacquer thinner, or acetone work great for cleaning the table
  25. tomsteve
    ray, one thing ive noticed with pre stain conditioning is the shade of stain doesnt seem to be as dark. a good thing with oil based stains is that they can be thinned down with mineral spirits to lighten them up,too.
×
×
  • Create New...