Jump to content

Jim McDonald

SSV Silver Patron
 View Profile  See their activity

  • Posts

    2,079

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by Jim McDonald

  1. Jim McDonald
    I bought a set for my Dewalt some time back. I had just replaced the thumb screws earlier that season, but based on a few early reviews, I popped for a set and found the differences worth the cost of the upgrade. Maybe the better bite on the blade or the feeling that top feeding seems faster--but I can't think of putting the factory clamps back on the saw. Yes, I did save them in case. Took me maybe five drill holes to realize i made the right choice.
  2. Jim McDonald
    I voted copper simply for the contrast. Makes the blue a touch more vibrant.
  3. Jim McDonald
    I went to the store last night and about the only things left in the meat case were some neck bones and ALL the "plant based meat". I guess the vegans want pork chops if the world is coming to an end.
  4. Jim McDonald
    There goes my plan to announce my candidacy for "Earth Czar" and base my campaign on more scrolling--less stress.
  5. Jim McDonald
    1. Any cuts on the scrap side of the line are not mistakes. 2. Any cuts off the line are "artistic interpretations". 3. Make sure what is in the spray can is what you intend. Clear lacquer and black gloss come in VERY similar cans. 4. Most important--have fun; don't get hung up on details; don't be afraid to fail--and remember to laugh as you sail those failures into the burn pit.
  6. Jim McDonald
    They are having an open house to show off their new building. Not a true show like Tony was talking about. Got to go once and it great. Got to meet so many folks and see some amazing demos.
  7. Jim McDonald
    Beautiful saw. Will look so much better with a thin haze of sawdust in the table.
  8. Jim McDonald
    If I'm seeing this correctly, the "Queen's Clocks" logo in the upper right looks suspiciously like the English band's logo.
  9. Jim McDonald
    Great looking work. Can't wait to see what the future brings us to see.
  10. Jim McDonald
    Since I do 99% of my work on the patio, I say I have a shop as big the outdoors--even though I only use about 20 square feet. Makes it a seasonal endeavor here in Central Indiana where the temperature was hovering around 1°F here this morning--but we carry on when we can. So, greeting from the frozen prairie and best wishes as you acclimate to a smaller space.
  11. Jim McDonald
    They may have Loctite on them and let's hope it is blue--not red or green.
  12. Jim McDonald
    Well written 200+ years ago and beautifully cut and finished.
  13. Jim McDonald
    Yes, they do have different temps. But, glue guns also are set for different temp sticks. You can't use a high temp stick in a low temp gun--and a low temp stick in a high temp gun is a mess. (Just trust me)
  14. Jim McDonald
    I have the Ryobi glue gun I got when I bought some new batteries for my system of tools. Like others above, i clamp the stack and glue corners and center. Works great for me, but others have their valid methods.
  15. Jim McDonald
    Love your bird house and the detail you put into it.
  16. Jim McDonald
    That is an absolutely fantastic cutting. So much detail and depth of the image.
  17. Jim McDonald
    From an infrequent visitor to the Palmetto State, a big welcome from Indiana. You will be surprised just how far you can go with just a little practice and determination. (I'm living proof that you don't have to be gifted to enjoy time at the saw. The gifted are the pattern designers--I'm just a hack with wood and some saw blades.)
  18. Jim McDonald
    Quite a bit of work, but the finished product will be worth it.
  19. Jim McDonald
    If that is fooling around, don't show us up too badly when you get serious!
  20. Jim McDonald
    There are special blades for metal work. I know because I bought a few as Sloan's was closing. Haven't used them, don't have a project in mind yet--but I've got the blades!
  21. Jim McDonald
    I had a very good experience with the center in Indianapolis. Got the knocking fixed, but after about 3 cuts, it would not pull tension. They fixed the tension issue at no charge. I was without my saw for a short bit, but it just hums along now. (Of course, that meant I didn't pull the trigger for a new Pegas )
  22. Jim McDonald
    This is not my first project. I cut a pinewood derby car for my son first with a pawnshop single speed Delta. But, this is probably from my first run of Christmas ornaments. Second shot is six Steve Good nativities.
  23. Jim McDonald
    From a former resident of the east side (James/Maryland), welcome to the festivities. Questions are answered, constructive criticisms are posted when asked and applause given as needed. Blade wear is a tough topic. I have had blades I didn't think would ever wear down and others that cut about 6 inches before I tossed it to the side. Scroll saw work is a constant dance between speed and feed. You will get a feel for how everything is going. I mean the speed of the blade and how much wood you are cutting at a given time. Blades figure into that as well. Most of us have two or three blade sizes/types we use 95% of the time.
  24. Jim McDonald
    That would look great either lined or open because of the great cutting on all those curves. Good looking piece(s).
  25. Jim McDonald
    One quick question, if I may? Seems there is "smoke smudge" on the pieces. If you put down a barrier like tape or shelf liner, do you think there would be any smudging? When I say smudge, maybe the picture will illustrate. (And let it be known, I am in NO way knocking the work. I think it will be a big addition to your stable of products)
×
×
  • Create New...