Jump to content

Multifasited

Member
 View Profile  See their activity

  • Posts

    1,626

  • Joined

  • Last visited

  • Days Won

    17

 Content Type 

Everything posted by Multifasited

  1. Multifasited
    Error's for what ever reason are costly Table saws ,Chain saws ,band saws ,punch presses * of course MOTOR CYCLES ,None feel, taste or care ,even the best attempts at safety some times is not enough ,Murphy lives ,usually when you think you are in command is when accidents happen .a small flying stone just caused the death of a motor cycle driver yesterday .Anytime you play with fire there is the chance you will get burned ,all you can do is the best you can and pray Murphy is some where else that day ,even the osha cowboy is not exempt!
  2. Multifasited
    The swivel tip of clamping screw ,has come out of the clamping screw ,normally it pivots ,but remains connected much like the movable tip on a c-clamp It came out ,and got distorted ,and egg shaped enough that it can no longer return with the clamp screw into the hole it rides in , I scanned sketch ,for some reason came out crazy ,I hope it makes some kind of sense ,parts ordered ,replacing complete clamp unit upper and replacing set and clamp screw lower also.
  3. Multifasited
    The swivel tip of clamping screw ,has come out of the clamping screw ,normally it pivots ,but remains connected much like the movable tip on a c-clamp It came out ,and got distorted ,and egg shaped enough that it can no longer return with the clamp screw into the hole it rides in ,
  4. Multifasited
    Well I bit the bullet ,may have found part of the problem ,The rotary tip on the clamps screw came out of the clamp screw and I have been unable to get it out of the clamp ,evadently ,it is woperjawed some way ,even tried to press out with opposite set screw to no avail ,got it realigned I can at least use it till parts get here ,so I ordered a new upper clamp assembly two new set screws and two new clamp screws ,Lord knows it's earned It's keep the number of times used in the years I have had the saw ,this is the first issue I have had with it ,so after they get here I will replace them all and keep the lower clamp screw for a spare ,the issue will be resolved ,the clipping does really help especially in the center of a large fret pattern .Thanks for all the input and advice !
  5. Multifasited
    Your lucky to have found the answer for you my spirals , even the supposed flat ones are not,That little twist seems to want to twist and bow in some kind of fashion when I clamp up ,the longer the tail the worse it gets ,the possibility that I over tighten is always there ,or that I use more tension then others but The shorter blade has helped as well bottom loading ,as long as the set screw tip is out past the clamps edge should not an issue if both top and bottom are alike .I don't have issues with straight blades ,which make me think it's the slight twist ! I will try easing off on the tightening to see if that has any impact ,I like others run a blade till it won't cut good ,so there are many many re -clamps involved .
  6. Multifasited
    Blade end distortion has been a ever present frustration ,when doing a mega hole pattern ,To eliminate the 90% of the problem ,I clip the blade off 1/8" above the clamp mark on the blade ,just about where the bend always starts ,makes threading much much easier and stops blade fatique at the end from cross threading at insertion .It also helps alignment for next clamp ,being a bottom loader shorter blade also helps ,you only clamp in is area ,everything above 1/8" is problematic any way,Should work equally well to top loaders as well .Works for me hope it helps some of you too!
  7. Multifasited
    Black cat's too inverted name play ,us Grump's understand , Welcome ! When you get a chance or are bored go back thru the old threads there is a wealth of just about anything your curious about !
  8. Multifasited
    Welcome ,Pizon ,you have been hanging out with the wrong crowd, We all speak some form of SCROLL ,some not too kosher ,but SCROLL none the less ,Jump in the saw dust is fine !! QUESTIONS AND EXCUSES are free as well as OPINIONS ! Pictures and new ideas are always looked forward to! Carl
  9. Multifasited
    Thanks everybody ,I just can't leave things alone ,This I think is going to be IT! I hope I didn't screw it up !
  10. Multifasited
    I got my toothbrush sander charged up,I'm going to try finish sanding and cleaning up some !
  11. Multifasited
    This is the modified version: Hope some one enjoys the difference !
  12. Multifasited
    Thanks Jim,I'll check it out ,found a couple on u-tube ,simple and pretty neat !
  13. Multifasited
    Hey II remember him,AUTO and I went to different schools together,say Hi to him for me ,He was always set in his ways ,and did everything the same way !LOL
  14. Multifasited
    Has anybody tried to convert a electric tooth brush into a mini detail Sander ? Seems to me that it might just be the Cat's meow !
  15. Multifasited
    No limit on toothpicks or popcycle sticks ,We won !
  16. Multifasited
    I while back one of my grand sons ,came home with a extra credit project to build a strong popcycle bridge ,for school ,a contest to build a structual bridge to be pressure tested to test it's strength .We discussed angles ,and trusses, cross bracing and the like , He designed one and built it ,we discussed it's weakness 's .Then he taunted me to build one that I thought was stronger . The deal was to take both to school and bring home the winner under identical test and stop testing once the winner was proven ,and not keep going till distruction of the winner was accomplished.Heres the winner !
  17. Multifasited
    Thanks for the kind words ,I'm playing with a copy of the cat want try some modifications ,who know's it might work ! Later Carl
  18. Multifasited
    Beautiful .The only problem I,see would be .Using it ,and messing up such a great looking piece !
  19. Multifasited
    You had a very good short time in the shop,very well done on Both !
  20. Multifasited
    I thought ,I try something less serious !!
  21. Multifasited
    Thanks you,Roly ,for taking the time to notice what I over looked in my happy haste ,Eyes ,to me are the key to the mood of portrait ,the intense hunter was the mood I was aiming for .It looks a little better now ! Thanks again. Carl
  22. Multifasited
    I always start with the (eyes) .as for the neighbor ,next time you see him ,tell in an excited voice about your new job w/ NSA .
  23. Multifasited
    I decided to attempt a pattern of a new neighbor ,that moved in. Being disruptive he was asked to leave ,we had words ,He's gone to a better place!
  24. Multifasited
    Boy !!Your scrollsaw catch"s some dandies .Nice mount!
  25. Multifasited
    I would like to get a buck a hole ,Dam wood eye!
×
×
  • Create New...