Jump to content

dgman

SSV Patron
 View Profile  See their activity

  • Posts

    6,565

  • Joined

  • Last visited

  • Days Won

    17

 Content Type 

Everything posted by dgman

  1. dgman
    I’ve cut that pattern out of solid Cherry and solid popular without any problem or breakage. I love the look of solid hardwoods. To me, BB looks so bland, even stained.
  2. dgman
    Never heared of them but am intrigued by the beef and hamburger
  3. dgman
    Tariffs
  4. dgman
    Magnificent !!!
  5. dgman
    Welcome to the forum! The FD ultra reverse blades have 2 teeth facing down and every third tooth facing up. Sounds like you have the blade upside down. There is a crimp on the blade that designates the up position. All other blades do not have this crimp.
  6. dgman
    That’s a tough question to answer without knowing what exactly the project is. I was in mid answer when JT’s answer came up, and was thinking the same thing. For me, i never use plywood for scrollsaw projects. I always use hardwoods. Yes hardwoods are getting more expensive but then so is everything else.
  7. dgman
    I would not use double stick tape to attach the layers. I would tape the stack at the edges. You will struggle trying to remove pieces from double stick tape as you mentioned. Clamp the stack together, then using blue masking tape, tape just the edges together. You can use an exacto knife or a razor blade to remove excess tape from the top and bottom of the boards. If you tape the entire edge, the stack will stay together. While you cut the stack. By the way, welcome to the forum!
  8. dgman
    I used that product on the stable of a large Nativity I did a few years ago. I used pine for the stable. I was happy with the results.
  9. dgman
    A fair share I sell to the local Wild Bird Unlimited store. Then I sell them at the annual Christmas Boutique in November . What’s left I give to friends and family, and gift to other folks like the mail guy, the ups driver, the FedEx driver, pizza delivery person and so on.
  10. dgman
    What I do is pre-crease the pattern using a thin steel ruler. Once the pattern is creased, it makes it easier to line up onto the blank. For pieces that have interior cuts, there is really no tolerance. If the pattern is not lined up properly, the inside cuts will not line up. If there are no inside cuts, there may be a small variance in the line to the edge of the blank. Each year cur up to 100 compound cut mini birdhouses. Beacuse there are no inside cuts, i don’t stress on being 100% lined up. You really don’t notice if it’s off. But, if I’m cutting something with inside cuts such as windows and doors, it will be noticed.
  11. dgman
    Or you can do a “u” turn. Cut past the corner, make a u turn in the wast side, then line up the line and proceed.
  12. dgman
    The smile on his face says it all ! Nice work!
  13. dgman
    I showed it to my wife, she said it would be criminal to use it as a scroll saw table!
  14. dgman
    Just curious what she did for you to send a cudos to her? I buy a lot of patterns from her also, but i sent a special request to her last year and never heard back from her.
  15. dgman
    I’m with everyone else. Gel stain is not appropriate for fret work. I do not use BB ply for most of my work especially ornaments. I use strictly hard woods. Gel stain is oil based and may seep out over time, and most certainly needs a top coat even if it doesn’t get handled often. Standard oil based stain would be best to use because gel stain will fill the frets with the gel and you will be cleaning it out for a long time. If you choose to use it, let us know how it works out for you.
  16. dgman
    Well, he’s made it into the race!
  17. dgman
    A heat gun or a hair dryer will loosen the pattern. Be carful that you don’t scorch the wood or your fingers. Also I keep a spray bottle filled with mineral spirits. Just spritz onto the pattern. Let it soak into the paper, then you can easily peel off the pattern. Ideally, you need to learn how much adhesive to spray so the pattern stays on the wood without falling off while cutting but being able to remove the pattern when done cutting. A lot of folks will apply blue painters tape before the pattern. This allows you to easily peel the tape off with the pattern.
  18. dgman
    If you look at the add index, there are only eight advertisers. With so few advertisers, they won’t last too much longer.
  19. dgman
    Do not use mdf for outdoors projects. It will absorb moisture and crumble. There is a product called MDO. It is designed for outdoor signs.
  20. dgman
    You can’t tell by looking at them. The notch is the top of the blade. If you look at the label, it tells you the same thing.
  21. dgman
    I hope yours was a grand day Marge!
  22. dgman
    Merry Christmas to you too Dale!
  23. dgman
    Merry Christmas to you too Ray!
  24. dgman
    I have made two sets of these, one last year and one this year. Both made for the Christmas Boutique I do each year. Both set sold! A Sheila Landry pattern set. The reindeer are 1/4” and 1/2” red oak. The sleigh is 1/4” Maple and 3/8” Sapele.
  25. dgman
    Very cool! Do you use a pattern or cut freehand?
×
×
  • Create New...